We are laptop repair specialists!
We have qualified, A+ Certified Technicians ready to diagnose your laptop!
Whether you need a new part, or simply do not know why your laptop is acting up, feel free to give our technicians a call to give you an estimate. MORE
Our A+ Certified Technician will diagnose your laptop completely, and inform you of the problem. Estimated parts and labor to fix it will be given upon completion of testing... MORE
Reflective LCDs, often found in digital watches and calculators, are illuminated by external light reflected by a (sometimes) diffusing reflector behind the display. This type of LCD can produce darker 'blacks' than the transmissive type since light must pass through the liquid crystal layer twice and thus is attenuated twice, however because the reflected light is also attenuated twice in the translucent parts of the display image contrast is usually poorer than a transmissive display. The absence of a lamp significantly reduces power consumption, allowing for longer battery life in battery-powered devices; small reflective LCDs consume so little power that they can rely on a photovoltaic cell, as often found in pocket calculators. The phosphors in a plasma display give off colored light when they are excited. Every pixel is made up of three separate subpixel cells, each with different colored phosphors. One subpixel has a red light phosphor, one subpixel has a green light phosphor and one subpixel has a blue light phosphor. These colors blend together to create the overall color of the pixel. By varying the pulses of current flowing through the different cells, the control system can increase or decrease the intensity of each subpixel color to create hundreds of different combinations of red, green and blue. In this way, the control system can produce colors across the entire visible spectrum. Plasma displays use the same phosphors as CRTs, accounting for the extremely accurate color reproduction. General characteristics A liquid crystal display (LCD) is a thin, flat display device made up of any number of color or monochrome pixels arrayed in front of a light source or reflector. It is prized by engineers because it uses very small amounts of electric power, and is therefore suitable for use in battery-powered electronic devices. Plasma displays are bright (1000 lx or higher for the module), have a wide color gamut, and can be produced in fairly large sizes, up to 260 cm (102 inches) diagonally. They have a very high "dark-room" contrast, creating the "perfect black" desirable for watching movies. The display panel is only 6 cm (2 1/2 inches) thick, while the total thickness, including electronics, is less than 10 cm (4 inches). Plasma displays use as much power per square meter as a CRT or an AMLCD television; in 2004 the cost has come down to US$1900 or less for the popular 42 inch (107 cm) diagonal size, making it very attractive for home-theatre use. Real life measurements of plasma power consumption find it to be much less than that normally quoted by manufacturers. Nominal measuments indicate 150 Watts for a 50" screen. The lifetime of the latest generation of PDPs is estimated at 60,000 hours to half life when displaying video. Half life is the point where the picture has degraded to half of its original brightness, which is considered the end of the functional life of the display. So if you use it at an average of 2-1/2 hours a day, the PDP will last approximately 65 years.